The confusion that starts every awkward phone call
A customer buys a half beef. You tell them it's about 370 pounds. The truck shows up from the processor, they stack the boxes in the chest freezer, and the packages add up to around 240 pounds. Now they're on the phone asking where their other 130 pounds went.
Nobody got cheated. The buyer just paid on hanging weight and took home take-home weight, and those are two different numbers — with a third number, live weight, sitting behind both of them. If you sell beef or pork shares, the single best thing you can do is explain all three before the sale, in writing, so the freezer never surprises anyone.
This guide walks through the three weights, why each one shrinks, what moves the final number up or down, and how to quote a share so buyers feel taken care of instead of shorted. Share this page with your buyers — it answers their question and saves you the call.
The three weights, start to finish
Live weight is the animal standing in the field. You'll rarely quote a share on it, because so much comes off before anyone sees a steak.
Hanging weight (also called carcass weight or hot carcass weight) is what's left after the hide, head, feet, and organs are removed. Your processor puts the carcass on the rail and weighs it. This is the number most shares are billed on, because it's the first honest, verifiable weight in the whole process.
Take-home weight is the boxed, wrapped meat that actually goes in the freezer. It's hanging weight minus the bone, fat, and moisture lost during aging and cutting.
The gap between hanging and take-home is where buyers get confused — so let's put real numbers on it.
Where the pounds actually go (beef)
Here's a representative finished steer, using land-grant extension averages (e.g. University of Wisconsin, Oklahoma State). Treat these as typical ranges, not promises — actuals vary by breed, finish, bone-in vs. boneless, and trim.
A roughly 1,200 lb steer hangs at about 740 lb — a dressing percentage near 62%. From there, cutting, boning, and trimming bring it down to about 480 lb of packaged meat. That's a carcass cutting yield in the mid-60s, and it leaves you with only about 40% of the original live weight as freezer meat (Oklahoma State's rule of thumb is around 42%).
So a half beef works out to roughly 370 lb hanging → about 240 lb take-home. That 130-pound difference isn't shrinkage you did wrong — it's bone, fat, and the moisture that leaves during dry aging and cutting. The carcass weight was always going to include parts that don't get wrapped.
The big teaching point: dressing percentage is not the freezer amount. A 62% dressing percentage tells you how big the carcass is, not how much meat comes home.
Pork works the same way (with higher numbers)
Hogs dress out higher than cattle because the skin usually stays on and there's less to remove.
A roughly 250 lb market hog hangs at about 180 lb — a dressing percentage around 72% — and yields about 125 lb of take-home meat at a cutting yield near 70%. A half hog is therefore about 90 lb hanging → about 63 lb take-home.
Keep the lard, bones, and skin and that pork number climbs; go fully boneless and it drops. Which brings us to the one thing buyers actually control.
The cut sheet moves the final number
Two buyers can take the exact same hanging carcass and walk away with noticeably different freezer totals, because the cut sheet decides what stays and what gets cut away:
- Lower take-home: boneless everything, closely trimmed fat, no soup bones or organs. Cleaner packages, fewer total pounds — cutting yields closer to 62%.
- Higher take-home: bone-in roasts and steaks, keep the fat and trim, take the bones, lard, and organ meats — cutting yields up toward 71% on beef.
Neither choice is wrong. A buyer who wants bone-in ribeyes and soup bones will see a higher number on the scale; one who wants boneless, lean cuts will see a lower one. Just make sure they understand that's their choice, not a measure of how well the animal finished.
How to explain this to your buyers
Copy this into your reservation email and you'll head off most of the confusion:
About the weights — please read before you reserve. Your share is priced on hanging (carcass) weight — the weight the processor records when the carcass goes on the rail. That is the standard, verifiable weight for shares.
The meat you take home will weigh less than the hanging weight. That's normal: the carcass still contains bone, fat, and moisture that come out during aging and cutting. As a rule of thumb, expect roughly 60–70% of the hanging weight to come home as wrapped meat.
For a half beef, that's about 370 lb hanging → roughly 220–250 lb in your freezer. Your cut sheet moves this: bone-in and keeping the fat and bones gives you more total pounds; boneless and closely trimmed gives you fewer but leaner packages.
Nothing is missing — the difference is the bone and trim that were never going to be wrapped.
Two best practices behind that note:
- Ask your processor for their historical take-home ratio. They cut hundreds of animals and know their real-world yield better than any chart. Use their number.
- Quote a range, not a single promise. "Roughly 220–250 lb" is honest and defensible. "Exactly 240 lb" is a complaint waiting to happen.
For more on setting these numbers, see how much meat is in a beef share and how to price a beef share so you don't lose money. If buyers ask about freezer room, point them to freezer space for a quarter, half, or whole beef. Selling pork? The half hog share guide walks through cut sheets, cure, and smoke.
Billing on hanging weight, without the spreadsheet
The honest way to sell a share is to take a reservation up front and bill the balance once you know the real hanging weight. The hard part has always been the bookkeeping: a deposit here, a final invoice there, a spreadsheet tracking who owes what after the processor reports.
TallyTill has a shipped feature built for exactly this. You list the share, a buyer reserves it, and when your processor reports the hanging weight you confirm that number — TallyTill then bills the balance on the confirmed weight. No deposit spreadsheet, no manual math, and the buyer sees the weight the price is based on. (It doesn't read the processor's scale or pay anyone out — you enter and confirm the weight, and it handles the billing.)
For the details on running a share this way, see selling beef shares by hanging weight. And if you're wondering about the rules where you sell, start with is it legal to sell beef by the share.
Get the weight math off your plate
You raised the animal. You shouldn't lose evenings to deposit spreadsheets and "where did my pounds go" phone calls. Set your shares up once, bill on the weight that's actually recorded, and send buyers this page so expectations are set before the freezer is full.
Create a free TallyTill account and list your first share — the entry plan is free, and no credit card is required. See pricing for what each plan includes.